Knoll Systems Projector HD108 Bedienungsanleitung

HD108 HD178 HD290 DLP™ Projector Users Manual v1.0

10 Composite (RCA) video connection Plug the composite video cable’s yellow connector into the video-out connector on the video device. Plug the other

11 Computer connections You can connect a computer’s VGA connector to the M1-DA/DVI input on the projector using an M1-A cable. RS-232 connection

12 Your projector has been factory optimized for adjust Picture menu options excellent performance no matter what the source. including As

13 The following tables show common problems. In some cases, more than one possible solution is provided. Try the solutions in the order they are

14

15 Still need assistance? If you need assistance, visit our website at www.knollsystems.com, or call us. See the User’s Guide for support contact i

16 Optimizing video images Your projector has been factory optimized for very good performance no matter what the source. However, if you wish to m

17 The menus are grouped by usage: • The Picture menu provides image adjustments. • The Settings menu provides set-up type adjustments that are not

18 Presets Presets: This allows you to customize settings and save the settings to be restored later. To restore the factory default sett

19 Color Space: this option applies to computer and Color space component video sources. It allows you to select a color space that has been s

2 FCC Warning Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FC

20 When Autosource is not checked, the projector defaults to Component initially, then defaults to whatever the last active source was when the projec

21 Custom key: allows you to assign a different function to the Custom key on the remote, allowing you to quickly and easily use the ef

22 Maintenance Cleaning the lens 1 Apply a non-abrasive camera lens cleaner to a soft, dry cloth. • Avoid using an excessive amount of clean

23 The lamp housing is designed to contain these fragments, but use caution when removing the lamp housing. Before replacing the lamp, clean the

24 Remote control discrete codes You can use these codes to program another remote to learn the projector’s remote functions. To activate discrete mo

25 Supported video formats Connector Signal Type Supported formats HDMI M1-DA Digital RGB and YCrCb Digital RGB video via M1-to-DVI

26 RS232 COMMAND FORMAT All commands consist of 3 alpha characters followed by a request, all enclosed in parentheses. The request can be a read requ

27 Supported commands Function Command Range Default Auto Ceiling Enable ACL 0-1 0 Auto Color Space Enable ACS 0-1 1 Auto Image

28 SUPPORTED COMMANDS (CONTINUED) Function Command Range Default Language LAN 0-11 0 0 = English 1 = French 2 = German

29 SUPPORTED COMMANDS (CONTINUED) Function Command Range Default Total Number of Strike TSA 0-65535 0 Attempts Vertical Position V

3 TABLE OF CONTENTS Safety Warnings 4 Introduction 5 Positioning the projector 7 Choosing the aspect ratio 8 Video connec

30 LIMITED WARRANTY Knoll Systems, Inc. (“Knoll”) warrants that each HD102, HD178 and HD290 (“the Product”) sold hereunder will conform to and functi

4 Important Operating Considerations for Safety • Place the projector in a horizontal position no greater than 15 degrees off axis. • Locate the

5 Introduction Congratulations and thank you for your excellent choice of a superior digital image projection device. Your new Knoll projector i

6 Component RCA S-Video Rear Connector Panel 12-volt DC output HDMI M1/DA/

7 Setting up the Projector There are a number of factors to consider when determining where to set up the projector, including the size and shape o

8 HD108 Projection Throw Distance 16:9 Video Screen: Screen Diagonal 92" 103" 106" 110" 122.5" 146.75" Minimum Dis

9 Video Connectors Component RCA S-Video 12-volt DC output HDMI M1/DA/DVI