Knoll-systems HD102 Bedienungsanleitung PDF herunterladen (Seite 21)

• Select a different standard if necessary. See page 23.

• Make sure your DVD player is set for a 16:9 television. See your DVD player’s user’s guide for

instructions.

Customizing the projector

You can customize the projector for your specific setup and needs.

• For rear projection, turn rear mode on in the Settings>System menu.

• For ceiling mounted projection, turn ceiling mode on in the Settings> System menu.

• Specify which source the projector checks first for active video during power-up.

• Turn the projector’s display messages on and off.

• Turn on power saving features.

• Specify blank screen colors and start up logos.

• Specify the language viewed on the menus.

• Save settings for the active source as a preset.

Using the menus

To open the menus,

press the Menu

button on the keypad

or remote. (The

menus automatically

close after 60

seconds if no buttons

are pressed.) The

Main menu appears.

Use the arrow buttons to move up and down to highlight the desired submenu, then press the Select button.

To change a menu setting, highlight it, press Select, then use the up and down arrow buttons to adjust the

value, select an option using radio buttons, or turn the feature on or off using check boxes. Press Select to

confirm your changes. Use the arrows to navigate to another setting. When your adjustments are complete,

navigate to Previous or Exit, then press Select to go to the previous menu; press the Menu button at any

time to close the menus.

Dots appear before the menu name. The number of dots indicate menu levels, ranging from one (the Main

menu) to four (the most nested

menus).

The menus are grouped by usage:

• The Picture menu provides image

adjustments.

• The Settings menu provides set-up

type adjustments that are not changed

often.

• The About menu provides a read-

only display of information about the projector and source.

Certain menu items may not be visible or may be grayed

depending upon a particular source being connected. For

example, Sharpness is only available for video sources and

is not visible when a computer source is active. Menu

options are grayed out only if the source is selected but no

signal is present. For example, if the projector is set to a

video source but the source, such as a DVD player, is turned off video menu options are grayed out.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Knoll-systems HD102 Bedienungsanleitung Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Knoll-systems HD102